Products
A wire rope winch with great performance that will enable you to always lift scenery, trussing, lights, banners and performers in a safe, reliable and discrete manner.
FLEXIBLE
- Zero fleet rope lead-off system: the rope always remains in the same point in relation to the machine, no matter how much rope is wound on to the drum.
- The outfeed pulley pivots on ball bearings, which enables to correct any alignment errors and control off-axis rope movement of up to no less than 20 degrees.
- Rope outfeed on 4 sides for the utmost installation flexibility, for example above a truss bar or horizontally, in the event of a necessity to limit the vertical space occupied.
- Both vertical and horizontal installation and operation.
- Quick-lock hanging system on 4 sides with independent clamps, running on tracks and able to be positioned freely, with mounting slots adaptable to 30x30, 40x40 and 52x52 trussing without having to replace the hanging system.
- Accessories available for single-tube installation, horizontal installation and overhung installation.
EASY TO HANDLE
- Dimensions 84x29x55 cm.
- Weight 84 kg.
- 8 handles, 4 of which are fitted on the short sides to facilitate the winch’s mounting, and 4 on the long sides for handling operations.
- Suitable for installations with limited load capacity or in restricted spaces, in which off-the-shelf winches and hoists cannot be used for questions of weight and dimensions.
- Quick-lock hanging system on 4 sides with independent clamps, running on tracks and able to be positioned freely, with slots adaptable to 30x30, 40x40 and 52x52 trussing without having to replace the hanging system.
SAFE
- Two independent super-silent brakes, one of which is mounted directly on the drum, fitted with a contactless “brake open” sensor, for the utmost safety and efficiency in the event of emergency braking.
- Double IP65 Encoder (absolute and incremental) for monitoring position and speed.
- Dynamic safety factors of over 10:1 for the rope and 6:1 for the rest of the components.
- Double limit switch system (end-of-travel and over-travel) which acts directly on the rope guide trolley.
- SIL3 load cell for monitoring applied weight and No-Load, no matter what the position of the machine and rope outfeed direction.
- Rope keeper roller on the drum, fitted with a safety sensor that intervenes in the event of the rope leaving its intended groove.
- Safety control system on the transmission belts, triggering an emergency stop in the event of excessive tension or breakage.
COMPLIANT
- Designed in compliance with the very recently approved standard UNI EN 17206:2020 “Machinery for Stages and Other Production Areas”.
- Compliant with Machinery Directive 2006/42/CE.
- Advanced Design and Simulation methods were used in order to optimize materials and components while also maintaining high safety and reliability standards.
RELIABLE
- Designed and certified for 1,600 hours’ operation with full load work at maximum speed.
- Constructed with quality component materials, to ensure minimum maintenance and low running costs.
INVISIBLE
- Total-black look
- Black wire rope
- Automatic rope line recovery system
INTERFACEABLE
- Ready for use with the most widespread show automation control systems.
- Large double contact box able to also hold any control system electronics as well as the terminal strip with all the contacts.
- The machine can also be supplied complete with a Moveket I-Motion control system. comando Moveket I-Motion.
- On request, Stage Dynamics can also provide a System Integration service.
SCALABLE
- Series CS winches can also be supplied in other versions with even higher technical specifications, such as, for example, greater working load, speed and acceleration.